集中空调系统冷源配置与负荷特性相关性的模拟研究

作者:翁达福 王建飞
单位:垒知控股集团股份有限公司
摘要:同样供冷需求下不同冷源方案的运行能耗不同,其主要影响因素为建筑全年空调负荷分布特性。以厦门市某栋公共建筑集中空调系统为例,对比分析了4种不同冷水机组台数及单机制冷量配置方案,提出了以冷负荷数据分析为基础的冷源优化配置初选计算方法和模拟计算方法。同时,研究了不同负荷特性与冷源配置之间的规律,分析总结了集中空调系统冷源配置的一般性规律和设计方法。
关键词:集中空调冷源配置负荷特性能耗模拟节能设计优化
作者简介:翁达福,男,1990年生,硕士研究生,工程师361004福建省厦门市思明区湖滨南路62号E-mail:wengdafu@163.com;
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 中国建筑科学研究院.民用建筑供暖通风与空气调节设计规范:GB 50736—2012[S].北京:中国建筑工业出版社,2012:134.

[2] 尹应德,朱冬生,汪南,等.集中空调冷水机组配置及水系统能耗分析[J].暖通空调,2009,39(12):94- 97.

[3] 杨佳,郝江文,裴智超,等.基于全年动态负荷分析的冷热源方案设计[J].暖通空调,2012,42(2):22- 25.

[4] 夏建军,燕达,江亿.建筑环境设计模拟分析软件DeST 第9讲冷热源与水系统模拟分析(上)[J].暖通空调,2005,35(3):56- 64.

[5] 燕达,夏建军,刘烨,等.建筑环境设计模拟分析软件DeST 第9讲冷热源与水系统模拟分析(下)[J].暖通空调,2005,35(4):42- 53.
Simulation research on correlation between cold source configuration and load characteristics of central air conditioning systems
Weng Dafu Wang Jianfei
(Lets Holding Group Co., Ltd.)
Abstract: The study finds that the operating energy consumption of different cold source schemes will be different under the same cooling demand, and the main influencing factor is the annual air conditioning load distribution characteristics of the building. Taking the central air conditioning system of a public building in Xiamen as an example, this paper compares and analyses four different chiller units and single cooling capacity configuration plans, and proposes a calculation method for the primary selection of cold source optimal configuration based on cooling load data analysis. At the same time, the law between different load characteristics and cold source configuration is studied, so as to analyse and summarize the general law and design method of cold source configuration of the central air conditioning system.
Keywords: central air conditioning; cold source configuration; load characteristic; energy consumption simulation; energy saving; design optimization;
536 0 0
文字:     A-     A+     默认 取消