基于BIM技术的地下综合管廊施工安全风险分析研究

作者:翟越 高欢 宗燕燕 孟凡东 张韵生
单位:长安大学地质工程与测绘学院 安徽海中环保有限责任公司
摘要:以某城市地下综合管廊施工安全风险分析为研究背景,将BIM技术应用于地下综合管廊施工安全管理中。首先对管廊施工过程中可能发生的高频易发事故(坍塌、高处坠落、机械伤害、火灾)进行危险源识别,得到可能发生部位,再使用PHA法对危险源进行风险评价,结果表明火灾事故危险等级最大。最后针对管廊火灾事故易发特点,将BIM模型应用于火灾、人员疏散软件模拟中。
关键词:地下工程建筑信息模型综合管廊安全风险分析
作者简介:翟越,教授,博士生导师,E-mail:zy@chd.edu.cn;*高欢,博士研究生,E-mail:2019026033@chd.edu.cn。
基金:国家自然科学基金(41502277);中央高校基本科研业务费专项资金(310826175029,300102269401);西安市建设规划项目(211826190566)。 -页码-:1-3
尊敬的用户,本篇文章需要20元,点击支付交费后阅读
参考文献[1] 李明浩,张文月.城市地下综合管廊研究现状与施工方法[J].基建管理优化,2019,31(3):43-45.
[2] 徐东升.基于建筑信息模型技术的建筑工程施工安全管理研究[D].天津:天津工业大学,2017.
[3] 王震.BIM技术在地下综合管廊施工阶段的应用[J].交通节能与环保,2019,15(4):124-126.
[4] ZHANG S,TEIZER J,LEE J,et al.Building information modeling (BIM) and safety:automatic safety checking of construction models and schedules [J].Automation in construction,2013,29(1):183-195.
[5] LEE HYUNSOO,LEE KWANGPYO.A construction safety management system based on building information modeling and real-time locating [J].Korean journal of construction engineering and management,2009,6(10):135-145.
[6] 李进军,蔡忠祥,张其林,等.基于BIM的三维激光扫描技术在复杂山地基础协同设计的应用[J].建筑结构,2020,50(18):122-125,56.
[7] 张立新,李宝东.BIM在综合管廊全生命周期智慧管控中的应用研究[J].公路,2018,63(11):210-214.
[8] 翁玉峰,张立新.基于BIM的综合管廊管理平台建设及研究[J].公路,2018,63(9):203-209.
[9] 黄欣,张瑞申,王建伟.BIM技术在山岭隧道管廊工程中的应用[J].施工技术,2019,48(22):90-92,100.
[10] 王方舜.城市综合管廊电缆火灾CFD数值模拟研究[J].武警学院学报,2017,12(8):125-129.
[11] 包胜,沈勇,李鹏世,等.基于BIM技术的施工安全管理应用体系[J].施工技术,2019,48(18):38-40,110.
[12] 赵永昌,朱国庆,高云骥.城市地下综合管廊火灾烟气温度场研究[J].消防科学与技术,2017,36(1):37-40.
[13] 张莹,邢志祥,陈浩鹏.应用BIM技术模拟地铁站火灾[J].消防科学与技术,2018,37(8):80-83.
[14] 周鹏,王慧琴,卢英.基于BIM的建筑消防疏散路径规划研究[J].消防科学与技术,2019,38(4):489-492.
Research on Construction Safety Risk Analysis of Utility Tunnel Based on BIM
ZHAI Yue GAO Huan ZONG Yanyan MENG Fong ZHANG Yunsheng
(School of Geology Engineering and Geomatics, Chang'an University Anhui Haizhong Environmental Protection Co., Ltd.)
Abstract: Taking the safety risk analysis of the utility tunnel in a city as the research background, BIM is applied to the construction safety management. Firstly, the high-frequency accidents(collapse, falling from height, mechanical injury, fire) that may occur in the construction process of the utility tunnel are identified and the possible positions are obtained. Secondly, the PHA method is used to evaluate the risk of the hazard sources, and the results show that the fire accident risk level is the largest. Finally, according to the characteristics of fire accident prone, BIM model is applied to the simulation of fire and evacuation software.
Keywords: underground engineering; building information modeling(BIM); utility tunnels; safety; risk analysis
991 0 0
文字:     A-     A+     默认 取消