与房间热耦合的风机盘管通断控制研究
摘要：为了在建筑热模拟软件DeST中实现通断控制的空调末端与建筑房间的热耦合模拟计算，基于DeST软件内核中的基础室温，建立了小时间步长条件下通断调节空调末端供冷热量与室内温度的热耦合仿真模型。将该模型的模拟结果与实验结果进行了对比，证明该模型可以较准确地模拟受控风机盘管末端供冷下房间的温度变化规律。使用该模型对一个建筑进行了模拟仿真，与非房间耦合模型进行了对比，结果显示，该模型能更真实地反映空调末端受控情况下的通断情况及房间温度的实时变化情况。
关键词：风机盘管房间热耦合空调末端通断控制室内温度建筑热模拟
尊敬的用户，本篇文章需要2元，点击支付交费后阅读
限时优惠福利：领取VIP会员
全年期刊、VIP视频免费!
全年期刊、VIP视频免费!
参考文献[1] GHIAUS C.Fuzzy model and control of a fan-coil[J].Energy and buildings,2001,33(6):545- 551.
[2] 洪阳，孙育英，王伟，等.基于Modelica风机盘管空调系统动态控制过程仿真平台的开发与验证[J].建筑科学，2016,32(4):120- 127.
[3] 战家乙，张中政，贺延壮.建筑空调系统建模与全过程仿真[J].暖通空调，2021,51(增刊2):271- 275.
[4] CHENG C,YI J,WEI Q.Evaluation of terminal coupling and its effect on the total delta-T of chilled water systems with fan coil units[J].Energy and buildings,2014,72:390- 397.
[5] 李巧.中央空调系统末端设备节能优化控制策略研究[D].广州：广州大学，2015:20- 40.
[6] YI Z M,YU H,WEI Q,et al.An advanced simulation test bed for the stability analysis of variable air volume air-conditioning control system.Part 1:optimal simplified model of building envelope for room thermal performance prediction[J].Energy and buildings,2018,158:950- 963.
[7] 杨世忠，衡丽帆.变风量空调系统房间温度的串级自抗扰控制[J].控制工程，2021,28(1):8- 13.
[8] 刘叶.商场中央空调系统能耗模拟与优化控制研究[D].武汉：华中科技大学，2015:32- 58.
[9] ZHOU J,ZHANG G,LIN Y,et al.Coupling of thermal mass and natural ventilation in buildings[J].Energy and buildings,2008,40(6):979- 986.
[10] 郭金钱.变风量空调系统的建模与控制仿真[D].青岛：青岛理工大学，2014:32- 41.
[11] 蓝政杰.基于Simulink变风量空调系统变静压控制仿真[D].哈尔滨：哈尔滨工业大学，2007:27- 52.
[12] JIANG Y.State-space method for analysis of the thermal behavior of room and calculation of air conditioning load[G]//ASHRAE.ASHRAE Transaction 1982:part 2.Atlanta:ASHRAE Inc.,1982:122- 132.
[13] 安晶晶，燕达，吴如宏，等.实现非定常物性围护结构与基于状态空间法建筑热过程耦合计算方法研究[J].建筑科学，2018,34(10):121- 129.
[14] 谢晓娜，宋芳婷，燕达，等.建筑环境设计模拟分析软件DeST 第2讲建筑动态热过程模型[J].暖通空调，2004,34(8):35- 47.
[15] 赵荣义，范存养，薛殿华，等.空气调节[M].4版.北京：中国建筑工业出版社，2009:159- 197.
[2] 洪阳，孙育英，王伟，等.基于Modelica风机盘管空调系统动态控制过程仿真平台的开发与验证[J].建筑科学，2016,32(4):120- 127.
[3] 战家乙，张中政，贺延壮.建筑空调系统建模与全过程仿真[J].暖通空调，2021,51(增刊2):271- 275.
[4] CHENG C,YI J,WEI Q.Evaluation of terminal coupling and its effect on the total delta-T of chilled water systems with fan coil units[J].Energy and buildings,2014,72:390- 397.
[5] 李巧.中央空调系统末端设备节能优化控制策略研究[D].广州：广州大学，2015:20- 40.
[6] YI Z M,YU H,WEI Q,et al.An advanced simulation test bed for the stability analysis of variable air volume air-conditioning control system.Part 1:optimal simplified model of building envelope for room thermal performance prediction[J].Energy and buildings,2018,158:950- 963.
[7] 杨世忠，衡丽帆.变风量空调系统房间温度的串级自抗扰控制[J].控制工程，2021,28(1):8- 13.
[8] 刘叶.商场中央空调系统能耗模拟与优化控制研究[D].武汉：华中科技大学，2015:32- 58.
[9] ZHOU J,ZHANG G,LIN Y,et al.Coupling of thermal mass and natural ventilation in buildings[J].Energy and buildings,2008,40(6):979- 986.
[10] 郭金钱.变风量空调系统的建模与控制仿真[D].青岛：青岛理工大学，2014:32- 41.
[11] 蓝政杰.基于Simulink变风量空调系统变静压控制仿真[D].哈尔滨：哈尔滨工业大学，2007:27- 52.
[12] JIANG Y.State-space method for analysis of the thermal behavior of room and calculation of air conditioning load[G]//ASHRAE.ASHRAE Transaction 1982:part 2.Atlanta:ASHRAE Inc.,1982:122- 132.
[13] 安晶晶，燕达，吴如宏，等.实现非定常物性围护结构与基于状态空间法建筑热过程耦合计算方法研究[J].建筑科学，2018,34(10):121- 129.
[14] 谢晓娜，宋芳婷，燕达，等.建筑环境设计模拟分析软件DeST 第2讲建筑动态热过程模型[J].暖通空调，2004,34(8):35- 47.
[15] 赵荣义，范存养，薛殿华，等.空气调节[M].4版.北京：中国建筑工业出版社，2009:159- 197.
Research on on-off valve control of fan-coil unit thermal coupling with room
Abstract: In order to realize the thermal coupling simulation calculation between the air conditioning terminal with on-off control and the building in the thermal simulation software DeST, based on the basic room temperature in the DeST software kernel, this paper establishes a thermal coupling simulation model of the cooling and heating capacity of the air conditioning terminal with on-off control and the indoor temperature under the condition of a small time step. The simulation results of the model are compared with the experimental results, and it is proved that the model can accurately simulate the indoor temperature change under the controlled fan-coil unit cooling. The model is used to simulate a building and compared with the uncoupled model. The results show that the model can more truly reflect the on-off situation of the controlled air conditioning terminal and the real-time change of the indoor temperature.
Keywords: fan-coil; room; thermal coupling; air conditioning terminal; on-off control; indoor temperature; building thermal simulation;
754
0
0