消防水泵工频巡检的一种设计思路

作者:朝新 刘杰
单位:中信建筑设计研究总院有限公司
摘要:目前市场上大多数消防巡检设备均是利用变频器实现低频巡检以达到巡检水泵电机的目的, 本文从常用水泵控制电路图二次控制原理出发, 提出一种工频巡检的新设计思路, 以实现对整个消防系统的全面巡检。
关键词:消防巡检 工频巡检 控制电路 泄压旁路 消防电源监控系统
作者简介: 朝新, 工程师, 注册电气工程师, Email:53607231@qq.com。
尊敬的用户,本篇文章需要1元,点击支付交费后阅读
参考文献[1] GB 50055-2011通用用电设备配电设计规范[S]. 北京:中国计划出版社, 2016.

[2] JGJ 16-2008民用建筑电气设计规范[S]. 北京:中国建筑工业出版社, 2008.

[3] GB 50974-2014消防给水及消火栓系统技术规范[S]. 北京:中国计划出版社, 2014.

[4] GB 27898.1-2011固定消防给水设备[S]. 北京:中国标准出版社, 2011.

[5] 16D 303-3常用水泵控制电路图[S]. 北京:中国计划出版社, 2016.

[6] 李蔚. 建筑电气设计关键技术措施与问题分析[M]. 北京:中国建筑工业出版社, 2016.
Design of Power Frequency Inspection for Fire Pumps
Chao Xin Liu Jie
(CITIC General Institute of Architectural Design and Research CO., Ltd.)
Abstract: At present, most of the fire inspection equipment on the market use frequency converter to realize low-frequency inspection to achieve the purpose of patrol inspection of pump motor. Based on the secondary control principle of the control circuit diagram of common water pump, this paper puts forward a new design idea of power frequency patrol inspection to complete the overall patrol inspection of the whole fire protection system.
Keywords: fire patrol inspection; power frequency inspection; control circuit; pressure relief bypass; fire power monitoring system;
843 10 10
文字:     A-     A+     默认 取消