井筒式超深地下立体车库结构计算方法研究

引用文献：

李瑛谢锡荣刘兴旺陈东童星张金红. 井筒式超深地下立体车库结构计算方法研究[J]. 建筑结构，2022，48（15）：146-152.

LI Ying XIE Xirong LIU Xingwang CHEN Dong TONG Xing ZHANG Jinhong. Study on calculation method of ultra-deep underground shaft-type stereo garage structure[J]. Building Structure，2022,48（15）：146-152.

作者：李瑛谢锡荣刘兴旺陈东童星张金红

单位：浙江省建筑设计研究院

摘要：井筒式地下立体车库占地面积小、开挖深度大、停车数量多，适用于解决老旧城区停车难。首先在介绍先后建成的3个工程案例的结构形式和监测数据后，总结超深地下立体车库结构计算的主要问题；然后以开挖深度为46.2m的杭州景芳园项目为例，分别利用三维连续介质有限元方法建立的地基-结构模型和结构-荷载模型，分析空间效应对结构的影响；最后以监测数据为参照，通过对比不同插入深度地下连续墙的内力和变形，分析有限元法和弹性支点法的计算精度。分析结果表明：井筒式地下立体车库结构可综合沉井和明挖地下室的做法，结合地下水处理和结构内力变形，选择合适的支护结构插入深度；对地下连续墙墙身最大弯矩和最大水平位移而言，三维有限元计算值是实测值的1.25倍以上，弹性支点法计算值是实测值的2倍左右。

关键词：井筒式地下立体车库；超深地下立体车库；空间效应；插入深度；逆作法；地下连续墙

作者简介：李瑛，博士，正高级工程师，注册土木工程师(岩土),主要从事深基坑工程的设计、咨询和研究，Email:liying3104@163.com。

基金：国家自然科学基金(52078466)；浙江省建设科研项目(2019K002、2019K003、2020K110)。

尊敬的用户，本篇文章需要2元，点击支付交费后阅读

限时优惠福利：领取VIP会员
全年期刊、会议视频
全部免费！培训视频打折！

参考文献[1] 宋金良.环-梁分载计算理论及圆形工作井结构性状分析[M].杭州：浙江大学，2004.
[2] 龚晓南，宋二祥，郭红仙.基坑工程实例6[M].北京：中国建筑工业出版社，2016.
[3] 魏仕锋，谭勇，廖少明，等.钱江隧道顺逆结合法深基坑变形性状实测分析[J].土木工程学报，2014,47(8):112-119.
[4] 朱道建，赵艳鹏，商金华，等.长兴岛工作井基坑变形及稳定性分析[J].岩土工程学报，2008,30(S1):100-104.
[5] 耿亚梅，陈卫忠，田洪铭，等.软土地层大型盾构工作井合理支护参数研究[J].岩石力学与工程学报，2011,30(7):1435-1444.
[6] 张雪婵，龚晓南，尹序源，等.杭州庆春路过江隧道江南工作井监测分析[J].岩土力学，2011,32(S1):488-494,537.
[7] 王卫东，徐中华，宗露丹，等.上海国际金融中心超深大基坑工程变形性状实测分析[J].建筑结构，2020,50(18):126-135.
[8] 王靖，张鹏，陈晓龙，等.电力隧道顶管工作井支护结构受力与变形实测分析[J].地下空间与工程学报，2021,17(5):1549-1556.
[9] 戴清峰，谭宇，黄涛，等.中风化岩超深基坑“两墙合一”地下连续墙设计研究与实践[J].建筑结构，2020,50(20):133-137,117.
[10] 王洪新.考虑二维和三维尺寸效应的基坑抗隆起稳定安全系数[J].岩土工程学报，2013,35(13):2144-2152.
[11] 黄俊光，阮菲，李健津，等.深基坑多支点支护结构抗倾覆计算讨论[J].建筑结构，2021,54(10):123-127.
[12] 李显龙.基于性能评价的停车用井筒基坑施工新技术研发[M].杭州：浙江理工大学，2018.

Study on calculation method of ultra-deep underground shaft-type stereo garage structure

LI Ying XIE Xirong LIU Xingwang CHEN Dong TONG Xing ZHANG Jinhong

(Zhejiang Province Institute of Architectural Design and Research)

Abstract: The underground shaft-type stereo garage has the obvious characteristics of small plane area, large excavation depth and large number of parking, which was helpful to solve the problem of parking difficulty in old residential areas and downtown areas. Firstly, after introducing the structural types and monitoring data of three engineering cases completed successively, the main problems in the calculation of ultra-deep underground stereo garage structure were summarized. Then, taking Hangzhou Jingfangyuan project with excavation depth of 46.2 m as study background, the foundation-structure model and the structure-load model established by the three-dimensional continuum finite element method were respectively used to analyze the influence of the space effect on the structure. Finally, using the monitoring data as a reference, the calculation accuracy of the finite element method and the elastic fulcrum method were analyzed by comparing the internal force and deformation of the underground diaphragm wall with different insertion depths. The analysis results showed that underground shaft-type stereo garage structure should integrate with the practice of caisson and open excavation basement to select the appropriate excavation method and insertion depth of retaining structure by combined with groundwater treatment and structural stress and deformation. For the maximum bending moment and maximum horizontal displacement of underground diaphragm wall, the calculation value of the three-dimensional finite element was more than 1.25 times of the measured value, and the calculation value of the elastic fulcrum method was about 2 times of the measured value.

Keywords: underground shaft-type stereo garage; ultra-deep underground stereo garage; space effect; insertion depth; inverse building method; underground diaphragm wall

282 0 0