钢管混凝土斜交网格外筒-RC核心筒结构体系在罕遇地震作用下的弹塑性行为研究

引用文献:

瞿浩川 杨学林 冯永伟 张陈胜 王震. 钢管混凝土斜交网格外筒-RC核心筒结构体系在罕遇地震作用下的弹塑性行为研究[J]. 建筑结构,2022,48(15):70-74.

QU Haochuan YANG Xuelin FENG Yongwei ZHANG Chensheng WANG Zhen. Elastoplastic behavior analysis on concrete filled exterior steel tube diagrid-RC core wall structure system under rare earthquake[J]. Building Structure,2022,48(15):70-74.

作者:瞿浩川 杨学林 冯永伟 张陈胜 王震
单位:浙江省建筑设计研究院 浙大城市学院土木工程系
摘要:钢管混凝土斜交网格外筒-RC核心筒体系不仅实现了与建筑立面设计的高度统一,同时提供了较大的抗侧刚度,在超高层建筑设计中应用日益广泛。基于某工程实例、合理的材料本构和单元选择,利用ABAQUS软件建立该体系的有限元模型,进行罕遇地震作用下的弹塑性时程分析,获得了结构基底剪力、顶部位移等结构整体响应时程曲线和构件受力情况。通过分析内外筒基底剪力时程曲线讨论结构协同作用机制,结合构件受力情况讨论结构关键构件屈服顺序与外筒斜交构件的屈服路径。结果表明,该体系内筒与外筒共同承担基底剪力,整体呈现筒中筒结构体系的受力特征;构件屈服顺序为混凝土核心筒连梁、斜交网格外筒斜柱、混凝土核心筒墙肢;外筒构件的屈服顺序呈现由结构底部至顶部、由角部至中央的发展模式,体现了斜交网格空间三维体系的受力优点。
关键词:钢管混凝土;斜交网格;弹塑性时程分析;协同作用;屈服路径
作者简介:瞿浩川,硕士,工程师,主要从事结构动力弹塑性行为的研究,Email:quhaochuan@ziad.cn。王震,博士,高级工程师,主要从事超高层和复杂钢结构的科研和设计方面研究,Email:wzjggc@163.com。
基金:浙江省重点研发资助项目(2018C03033-1);浙江省教育厅科研项目资助(Y202146072);浙江省基础公益研究计划项目(LGG22E080005)。
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 傅学怡,吴兵,陈贤川,等.卡塔尔某超高层建筑结构设计研究综述[J].建筑结构学报,2008,29(1):1-9,15.
[2] 方小丹,韦宏,江毅,等.广州西塔结构抗震设计[J].建筑结构学报,2010,31(1):47-55.
[3] 甄伟,盛平,王轶,等.北京保利国际广场主塔楼结构设计[J].建筑结构,2013,43(17):75-80,67.
[4] 张万开,甄伟,盛平,等.新北京中心三期塔楼结构抗震设计[J].建筑结构,2018,48(20):12-18.
[5] 方小丹,韩小雷,韦宏,等.广州西塔巨型斜交网格平面相贯节点试验研究[J].建筑结构学报,2010,31(1):56-62.
[6] 韩小雷,黄超,方小丹,等.广州西塔巨型斜交网格空间相贯节点试验研究[J].建筑结构学报,2010,31(1):63-69.
[7] 黄超,韩小雷,王传峰,等.斜交网格结构体系的参数分析及简化计算方法研究[J].建筑结构学报,2010,31(1):70-77.
[8] 王震,杨学林,冯永伟,等.超高层结构中不同斜交网格体系的抗侧性能影响研究[J].建筑结构,2020,50(1):38-43.
[9] 郭伟亮,滕军.超高建筑斜交网格筒力学性能研究[J].西安建筑科技大学学报(自然科学版),2010,42(2):174-179.
[10] 郭伟亮,滕军,容柏生,等.高层斜交网格筒-核心筒结构抗震性能分析[J].振动与冲击,2011,30(4):150-155.
[11] 韩小雷,唐剑秋,黄艺燕,等.钢管混凝土巨型斜交网格筒体结构非线性分析[J].地震工程与工程振动,2009,29(4):77-84.
[12] 史庆轩,吴超锋,王峰,等.高层斜交网格-RC核心筒结构地震反应能量分析[J].工程抗震与加固改造,2016,38(6):9-17.
[13] 过镇海,时旭东.钢筋混凝土原理和分析[M].北京:清华大学出版社,2003.
[14] 钟善桐.高层钢管混凝土结构[M].哈尔滨:黑龙江科学技术出版社,1999.
Elastoplastic behavior analysis on concrete filled exterior steel tube diagrid-RC core wall structure system under rare earthquake
QU Haochuan YANG Xuelin FENG Yongwei ZHANG Chensheng WANG Zhen
(Zhejiang Province Institute of Architectural Design and Research Department of Civil Engineering, Zhejiang University City College)
Abstract: Concrete filled exterior steel tube diagrid-RC core wall system not only achieves a high degree of unity with the building facade design, but also provides large lateral stiffness, and is increasingly used in the design of super high-rise buildings. Based on an engineering example, reasonable material constitutive and element selection, the finite element model of the system was established by ABAQUS software, and the elastoplastic time history analysis under the action of rare earthquake was carried out, and the overall response time-history curve of the structure and the stress of the members such as the base shear force of the structure and the displacement at the top was obtained. The synergistic mechanism of the structure was discussed by analyzing the time-history curves of the base shear force of the inner and outer tubes, and the yield sequence of the key structural members and the yield path of the oblique members of the outer tube were discussed in combination with the stress conditions of the members. The results show that the inner tube and the outer tube share the base shear force which presents the mechanical characteristics of the tube-in-tube structure system. The yield sequency of members is coupling beam of the concrete core tube, the inclined column of the outer tube of the diagrid, the wall pier of the concrete core tube. The yield sequency of the outer tube member presents the development mode of the bottom to top and corner to center which reflects the mechanical advantages of the three-dimensional system in the diagrid.
Keywords: concrete filled steel tube; diagrid; elastoplastic time history analysis; synergetic effect; yield path
284 0 0
文字:     A-     A+     默认 取消