基于BioWin®的城市污水处理厂全流程处理工艺模拟与优化

引用文献:

杭晨 牛涛 孙立柱 赵哲杰. 基于BioWin®的城市污水处理厂全流程处理工艺模拟与优化[J]. 给水排水,2018,48(7).

. [J]. build,2018,48(7).

作者:杭晨 牛涛 孙立柱 赵哲杰
单位:光大水务科技发展(南京)有限公司 光大水务(深圳)有限公司 光大水务(苏州)有限公司
摘要:BioWin®是一款能够模拟污水处理厂处理工艺全流程的软件。采用BioWin工艺模拟软件对苏州某城市污水处理厂处理工艺全流程进行了建模、校正和验证, 并利用建立的模型对该污水处理厂的工艺控制参数提出优化建议, 以期辅助指导该污水处理厂优化运行, 降低能耗、药耗及降低运行成本。
关键词:BioWin® 污水处理 全流程模拟 优化 节能降耗
尊敬的用户,本篇文章需要1元,点击支付交费后阅读
参考文献[1] Barker P S, Dold P L.General model for biological nutrient removal activated sludge systems:model presentation.Water Environment Research, 1997, 69 (5) :969~984

[2] 梅特卡夫和埃迪公司.废水工程:处理及回用.秦裕珩译.第4版.北京:化学工业出版社, 2004

[3] 国家环境保护总局.水和废水监测分析方法委员会水和废水监测分析方法.第4版.北京:中国环境科学出版社, 2002

[4] US EPA.QUAL2E-The enhanced stream water quality model.EPA/823/B-95/003.Environmental Research Laboratory, Athens, GA, USA, 1987

[5] Petersen B, Gernaey K, Henze M, et al.Calibration of activated sludge models:a critical review of experimental designs.Biotechnology for the Environment:Wastewater Treatment and Modelling, Waste Gas Handling.Springer Netherlands, 2003.3C:101~186

[6] Methods for wastewater characterization in activated sludge modeling.WERF Report, 2004, (21) :16~18

[7] 熊天煜.污水处理厂工艺设计优化及改造的模拟方法与应用研究:[学位论文].北京:清华大学, 2015

[8] 张行.基于BioWin的污水厂运行优化及达标改造技术研究:[学位论文].北京:北京建筑大学, 2016

[9] Holakoo L, Shaw A, Joubert E, et al.Development of a dynamic whole-plant model using the IWA good modeling practice unified protocol to investigate plant upgrade options.Proceedings of the Water Environment Federation, 2009, 7:7987~7999

[10] 董进波, 张磊, 陈恒宝, 等.Biolak工艺的BioWin稳态模拟及优化研究.环境科学与管理, 2015, 40 (11) :96~101

[11] 李鑫玮, 牛庆利, 周军, 等.BioWin在污水脱氮除磷系统中的应用研究.水工业市场, 2009, 11:38~41
1125 10 10
文字:     A-     A+     默认 取消