多源联网式输配供冷系统能耗研究

作者:赵民 师永霞 李杨
单位:西安建筑科技大学 中国建筑西北设计研究院有限公司
摘要:区域供冷目前主要存在集中式输配和分布式输配2种形式,总体多数以集中能源站、大管道、长距离输配为特征,导致输配能耗高、低负荷工况经济性差等问题。针对以上问题,本文提出了多源联网式输配供冷系统,各用户端分建能源站(多源),通过管网连接各能源站,实现在中低负荷期各用户能源自给自足,峰值负荷期由其他能源站(多源)补充。通过案例计算了集中式输配系统、分布式输配系统、多源联网式输配系统的输配能耗,结果表明,多源联网式输配系统比集中式输配系统节能41%,比分布式输配系统节能23%。
关键词:集中能源站多源能源站集中式输配分布式输配多源联网式输配能耗
作者简介:赵民,男,1972年生,工学博士,教授级高级工程师,710018西安市经开区文景路98号中国建筑西北设计研究院有限公司,E-mail:513159887@qq.com;
基金:陕西省科技厅重点研发计划项目“既有办公建筑能效提升绿色改造研究与应用”(编号:2023-YBSF-634);陕西省住房城乡建设科技科研开发计划项目“分区式能源站智慧互联区域能源规划技术研究”(编号:2022-K67);
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 清华大学建筑节能研究中心.中国建筑节能年度发展研究报告2022(公共建筑专题)[M].北京:中国建筑工业出版社,2022:6- 18.

[2] 江亿,胡姗.中国建筑部门实现碳中和的路径[J].暖通空调,2021,51(5):1- 13.

[3] 中国建筑节能协会.中国建筑能耗研究报告2020[J].建筑节能(中英文),2021,49(2):1- 6.

[4] 朱颖心,王刚,江亿.区域供冷系统能耗分析[J].暖通空调,2008,38(1):36- 40.

[5] 杨松.分布式输配技术发展概述[J].暖通空调,2021,51(5):44- 50.

[6] 徐瑞,吕砚昭,唐燕.某产业园区分布式供冷输配系统设计[J].暖通空调,2021,51(5):36- 39.

[7] HUO Y J,CAI L,ZHANG J Z.Research on pipeline characteristics and energy saving of distributed secondary pump system for district cooling[J].Energy procedia,2019,158:6405- 6412.

[8] 江亿.用变速泵和变速风机代替调节用风阀水阀[J].暖通空调,1997,27(2):68- 73.

[9] 江亿.大规模区域供冷技术可行吗?[J].环境经济,2015(10):17.

[10] AN J J,YAN D,HONG T Z,et al.A novel stochastic modeling method to simulate cooling loads in residential districts[J].Applied energy,2017,206:134- 149.

[11] 秦周浩.某大学动力分布式二级泵供热系统设计与分析[D].西安:西安建筑科技大学,2020:20- 22.

[12] 罗曙光,王朝晖,旷金国.区域供冷系统冷水输配运行控制分析[J].暖通空调,2021,51(12):9- 15.

[13] YANG S Z,REN Q C.Intelligent control technology for frequency conversion pump in air conditioning systems[J].Energy procedia,2011,11:1822- 1826.

[14] 吕砚昭.分布式供冷供热输配系统[J].暖通空调,2021,51(5):20- 25.

[15] 付祥钊.流体输配管网[M].2版.北京:中国建筑工业出版社,2005:150- 151.

[16] 石兆玉.正确应用分布式输配系统的设计理念[J].区域供热,2016(2):1- 5.

[17] 赵荣义.简明空调设计手册[M].北京:中国建筑工业出版社,1998:346- 348.

[18] 龙惟定.碳中和城市建筑能源系统(1):能源篇[J].暖通空调,2022,52(3):2- 17.
Research on energy consumption of multi-source networked transmission and distribution cooling system
Zhao Min Shi Yongxia Li Yang
(Xi'an University of Architecture and Technology China Northwest Architectural Design and Research Institute Co., Ltd.)
Abstract: At present, there are mainly two forms of district cooling: centralized transmission and distribution and distributed transmission and distribution. Generally, most of them are characterized by centralized energy stations, large pipelines and long-distance transmission and distribution, leading to high energy consumption and poor economy under low load conditions. In view of the above problems, this paper proposes a multi-source networked transmission and distribution cooling system, in which each user builds energy stations separately(multi-source) and connects each energy station through a pipeline network, so as to achieve energy self-sufficiency for each user during the medium and low load periods, and be supplemented by other energy stations(multi-source) during the peak load period. By calculating the energy consumption of centralized transmission and distribution system, distributed transmission and distribution system, and multi-source networked transmission and distribution system, the results show that the multi-source networked transmission and distribution system saves 41% energy compared to the centralized transmission and distribution system, and 23% energy compared to the distributed transmission and distribution system.
Keywords: centralized energy station; multi-source energy station; centralized transmission and distribution; distributed transmission and distribution; multi-source networked transmission and distribution; energy consumption;
556 0 0
文字:     A-     A+     默认 取消