以最小初投资为目标的供热管网环形干线初始流量分配方法

作者:汪怡心 王芃 张声婷 王威
单位:哈尔滨工业大学 寒地城乡人居环境科学与技术工业和信息化部重点实验室
摘要:环形干线初始流量分配是供热管网设计中管径初选的依据,能满足节点质量守恒原则的初始流量分配方法有很多,不同的流量分配方法初投资不同。本文以初投资最小为目标函数,以节点质量守恒和流量下限值为约束条件,构建了管段流量的优化模型,并采用既约梯度法求解。算例表明:在管段流量最小值为29 t/h时,最小初投资法的初始流量分配结果比最小平方和法节约5.15%的初投资;最小初投资法初始流量分配结果受流量下限值约束。
关键词:集中供热环形干线初始流量分配质量守恒初投资既约梯度法
作者简介:汪怡心,女,1996年生,硕士研究生;*王威,150001哈尔滨市南岗区西大直街66号哈尔滨工业大学建筑学院,E-mail:ww_jc@163.com;
基金:国家重点研发计划“政府间国际科技创新合作”重点专项“基于可再生能源热泵利用的复合型区域供热供冷系统关键技术研究与示范”(编号:2021YFE0116100);
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 严煦世,赵洪宾.给水管网理论和计算[M].北京:中国建筑工业出版社,1986:90- 91.

[2] 杨静,黄鸾.供热规划中环状管网和枝状管网的比较[J].区域供热,2013(5):51- 56.

[3] 沈致和.“最短树”的多水源给水管网流量分配[J].化工给排水设计,1996(4):3- 6.

[4] 顾丽华,王国明,项建平.采用节点累计法分配管段虚流量的方法[J].合肥工业大学学报(自然科学版),2005,28(4):421- 424.

[5] 王诗鹏,张国忠.管网最小平方和法初始流量分配[J].油气储运,2004,23(11):20- 21.

[6] 王国明,何煜辉.计高幂次管长的分配流量方法[J].给水排水,2000,26(8):23- 25,2.

[7] 徐得潜,贺忆,程瑞,等.环状给水管网流量分配方法研究[J].市政技术,2013,31(5):92- 95,100.

[8] 葛艾.供热管网经济比摩阻与经济供热半径关系的研究[D].北京:北方工业大学,2016:64.

[9] 张永超,刘学来,李永安.长输供暖热水管道经济比摩阻研究[J].区域供热,2021(1):44- 49,85.

[10] ALPEROVITS E,SHAMIR U.Design of optimal water distribution systems[J].Water resources research,1977,13(6):885- 900.

[11] FUJIWARA O,KHANG D B.A two-phase decomposition method for optimal design of looped water distribution networks[J].Water resources research,1990,26(4):539- 549.

[12] 俞国平.给水管网设计中的一种流量分配方法[J].中国给水排水,2000,16(4):31- 33.

[13] 建设部标准定额研究所.市政工程投资估算指标:第8册集中供热热力网工程:HGZ 47-108—2007[S].北京:中国计划出版社,2007:132- 134.

[14] 伊笑娴,陈芳,薛永明.集中供热管网比摩阻的简易计算方法探讨[J].节能,2018,37(2):86- 88.

[15] 李非.负定矩阵的性质和判定[J].科学咨询,2016(18):67- 68.

[16] 俞国平.给水管网最优化设计的一个方法[C]//土木工程中计算机应用文集——中国土木工程学会计算机应用学会成立大会暨第一次学术交流会论文集,1981:254- 263.

[17] 丛海兵,黄廷林,陆玉蓉.Wolfe法和Rosen法在给水系统参数估计中的应用研究[J].工程数学学报,2009,26(5):819- 826.

[18] 吕谋,赵洪宾,李红卫.扩建给水管网的直接优化计算方法[J].给水排水,1998,24(7):16- 20,3.

[19] 陈宝林.最优化理论与算法[M].北京:清华大学出版社,2005:360- 385.

[20] 李董辉,童小娇.数值最优化算法与理论[M].3版.北京:科学出版社,2010:207- 213.
Method of initial flow distribution for ring truck line of heating network with goal of minimum initial investment
Wang Yixin Wang Peng Zhang Shengting Wang Wei
(Harbin Institute of Technology Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology, Ministry of Industry and Information Technology)
Abstract: The initial flow distribution for the ring truck line is the basis for the initial selection of pipe diameter in the design of heating network. There are many initial flow distribution methods that can meet the principle of node mass conservation, and different flow distribution methods have different initial investment. In this paper, the minimum initial investment is taken as the objective function, the conservation of node mass and the lower limit of flow are taken as the constraints, the optimization model of pipe flow is constructed, and the reduced gradient method is used to solve it. The example shows that when the minimum flow of the pipe section is 29 t/h, the initial flow distribution result of the minimum initial investment method is 5.15% less than that of the minimum square sum method, and the initial flow distribution result of the minimum initial investment method is constrained by the lower limit of flow.
Keywords: central heating; ring truck line; initial flow distribution; mass conservation; initial investment; reduced gradient method;
585 0 0
文字:     A-     A+     默认 取消