轧花厂棉花堆场防雷接地系统设计

作者:魏志刚 张涓笑
单位:中国建筑西北设计研究院有限公司
摘要:本文通过实际的工程设计案例,介绍露天籽棉堆场防雷接地系统设计全过程,重点叙述了直击雷防护设计中接闪杆杆高比选过程、保护范围的验算及独立接闪杆的设计注意事项、接地要求等,并提出了相应的设计要点与解决方案。
关键词:防雷设计滚球半径接闪杆籽棉堆场接地电阻安全间距
作者简介:魏志刚,本科,机电二院副总工程师,高级工程师,Email:20569332@qq.com。
尊敬的用户,本篇文章需要1元,点击支付交费后阅读
参考文献[1] 建筑物防雷设计规范:GB 50057—2010[S].北京:中国计划出版社,2011.

[2] 建筑物防雷设施安装:15D501[S].北京:中国计划出版社,2015.

[3] 高翔,丁辉.某工业园区火工厂房防雷及接地设计方案[J].智能建筑电气技术,2015,9(04):8-12.

[4] 张辉,张靖悦,张树元.港口木片堆场防雷接地系统设计简析[J].港工技术,2018,55(S1):89-92.

[5] 中国航空规划设计研究总院有限公司.工业与民用供配电设计手册[M].第四版.北京:中国电力出版社,2016.

[6] 柯喆.港口危险货物集装箱堆场防雷设计[J].中国水运,2019(03):43-45.

[7] 唐京波.成都博物馆新馆[J].智能建筑电气技术,2020,14(04):66-69.
Design of Lightning Protection and Grounding System for Cotton Yard in a Ginning Plant
Wei Zhigang Zhang Juanxiao
(China Northwest Architectural Design and Research Institute Co.,Ltd.)
Abstract: In this paper,an introduction is given to the whole design process of lightning protection grounding system for open-air seed cotton yard based on a practical engineering case. It's focuses on the comparison and selection process of lightning rod height,the checking calculation of protection range,the design precautions and grounding requirements of independent lightning rod in direct lightning protection design,and puts forward corresponding design points and solutions.
Keywords: protection against lighting design; rolling ball radius; lightning rod; seed cottonyard; earthing resistance; safety distance;
1292 0 0
文字:     A-     A+     默认 取消