武汉江城之门大跨刚性连体超高层混合结构收缩徐变分析
引用文献：
张慎，孟仲永，王杰. 武汉江城之门大跨刚性连体超高层混合结构收缩徐变分析[J]. 建筑结构，2023，48（08）：62-67.
ZHANG Shen， MENG Zhongyong ，WANG Jie. Shrinkage and creep analysis of super high-rise hybrid structure with large-span rigid conjoined structure of River City Gate of Wuhan[J]. Building Structure，2023,48（08）：62-67.
摘要：武汉江城之门为双塔高位连体的门形超高层建筑，建筑高度241.9m,采用钢管混凝土柱框架+核心筒+加强层+连体巨型跨层桁架结构体系，核心筒角部及相交处内嵌钢骨，部分楼层内嵌钢板。采用SAP2000软件分别建立基于CEB-FIP 90、CEB-FIP 2010、GL2000理论的分析模型和无连体单塔模型，进行了考虑收缩徐变的非线性阶段施工模拟分析，对比了典型竖向构件变形和内力重分布结果。分析结果表明，伸臂桁架可有效平衡外框柱和核心筒的竖向变形差异；高位刚性连体的布置加大了外框柱和核心筒的竖向变形差异，其差异主要为弹性变形，收缩徐变引起的附加变形差异较小；混凝土收缩徐变带来的竖向构件轴力重分布表现为核心筒剪力墙卸载，外框柱和剪力墙内嵌钢骨加载，轴力变化最大值位于连体相邻下部楼层；对伸臂桁架和腰桁架内力影响主要体现为弦杆轴力的增大。
关键词：武汉江城之门；大跨刚性连体结构；超高层混合结构；收缩徐变；非线性施工模拟；
基金：住房与城乡建设部建设科技计划项目(2017-K5-014)。
尊敬的用户，本篇文章需要2元，点击支付交费后阅读
限时优惠福利：领取VIP会员
全年期刊、会议视频
全部免费！培训视频打折！
全年期刊、会议视频
全部免费！培训视频打折！
参考文献[1] 郭彦林，刘学武.大型复杂钢结构施工力学问题及分析方法[J].工业建筑，2007,37(9):1-8.
[2] CEB-FIP model code 1990:design code[S].London:Thomas Telford Ltd.,1990.
[3] Model code 2010,final draft-volume 2:FIB bulletin 65[S].Stuttgart:Document Competence Center Siegmar Kästl e.K.,2012.
[4] GARDNER N J,LOCKMAN,M J.Design provisions for drying shrinkage and creep of normal-strength concrete[J].ACI Materials Journal,2001,98(2):159-167.
[5] 贾红学，张旭乔，冯俊，等.超高层结构考虑钢管混凝土柱收缩徐变影响的施工模拟分析[J].建筑结构，2019,49(S1):519-523.
[6] 陈晋，邓岚青，丁晗，等.欧美最新混凝土收缩徐变理论在超高层结构非线性施工分析中的应用[C]//第二十四届全国高层建筑结构学术会议论文集.北京：中国建筑科学研究院，2016.
[7] BAKER W F,KORISTA D S,NOVAK L C.Burj Dubai:engineering the world’s tallest building [J].The Structural Design of Tall and Special Buildings,2007,16:361-375.
[8] 钟善桐.钢管混凝土结构[M].3版.北京：清华大学出版社，2003.
[9] 贾红学，张旭乔，冯俊，等.超高层结构考虑钢管混凝土柱收缩徐变影响的施工模拟分析[J].建筑结构，2019,49(S1):519-523.
[10] 韩林海，杨有福，李永进，等.钢管高性能混凝土的水化热和收缩性能研究[J].土木工程学报，2006,39(3):1-9.
[11] 张勇波，王文渊，王海，等.宁波新世界广场5号地块稀疏外框柱超高层塔楼施工模拟分析[J].建筑结构，2018,49(3):7-13.
[12] 蒋方云.高层钢框架—混凝土核心筒混合结构施工期竖向变形分析与监测[D].重庆：重庆大学，2016.
[2] CEB-FIP model code 1990:design code[S].London:Thomas Telford Ltd.,1990.
[3] Model code 2010,final draft-volume 2:FIB bulletin 65[S].Stuttgart:Document Competence Center Siegmar Kästl e.K.,2012.
[4] GARDNER N J,LOCKMAN,M J.Design provisions for drying shrinkage and creep of normal-strength concrete[J].ACI Materials Journal,2001,98(2):159-167.
[5] 贾红学，张旭乔，冯俊，等.超高层结构考虑钢管混凝土柱收缩徐变影响的施工模拟分析[J].建筑结构，2019,49(S1):519-523.
[6] 陈晋，邓岚青，丁晗，等.欧美最新混凝土收缩徐变理论在超高层结构非线性施工分析中的应用[C]//第二十四届全国高层建筑结构学术会议论文集.北京：中国建筑科学研究院，2016.
[7] BAKER W F,KORISTA D S,NOVAK L C.Burj Dubai:engineering the world’s tallest building [J].The Structural Design of Tall and Special Buildings,2007,16:361-375.
[8] 钟善桐.钢管混凝土结构[M].3版.北京：清华大学出版社，2003.
[9] 贾红学，张旭乔，冯俊，等.超高层结构考虑钢管混凝土柱收缩徐变影响的施工模拟分析[J].建筑结构，2019,49(S1):519-523.
[10] 韩林海，杨有福，李永进，等.钢管高性能混凝土的水化热和收缩性能研究[J].土木工程学报，2006,39(3):1-9.
[11] 张勇波，王文渊，王海，等.宁波新世界广场5号地块稀疏外框柱超高层塔楼施工模拟分析[J].建筑结构，2018,49(3):7-13.
[12] 蒋方云.高层钢框架—混凝土核心筒混合结构施工期竖向变形分析与监测[D].重庆：重庆大学，2016.
Shrinkage and creep analysis of super high-rise hybrid structure with large-span rigid conjoined structure of River City Gate of Wuhan
Abstract: The River City Gate of Wuhan is a twin-tower high-position conjoined door-shaped super high-rise building with the architectural height of 241.9m. It adopts a concrete filled steel tube column frame + core tube + reinforcing layer + connected giant cross-layer truss structural system. Steel bones are embedded in the corners and intersection of the core tube, and steel plates are embedded in some floors. SAP2000 software was used to establish the analysis model and the non-conjoined single tower model based on CEB-FIP 90, CEB-FIP 2010 and GL2000 theories. The non-linear construction simulation analysis considering shrinkage and creep was carried out, and the deformation and internal force redistribution results of typical vertical members were compared. The analysis results show that the outrigger truss can balance the vertical deformation difference between the outer frame column and the core tube effectively. The vertical deformation difference between the outer frame column and the core tube is increased by the arrangement of high-position rigid conjoined structure, and the difference is mainly elastic deformation, and the additional deformation caused by shrinkage and creep is small. The redistribution of axial force of vertical members caused by concrete shrinkage and creep is manifested as the unloading of shear wall of core tube and the loading of steel bones embedded in the outer frame column and shear wall. The maximum variation of axial force is located in the lower floors adjacent to the conjoined structure. The influence on the internal force of outrigger truss and waist truss is mainly reflected in the increase of string axial force.
Keywords: River City Gate of Wuhan; large-span rigid conjoined structure; super high-rise hybrid structure; shrinkage and creep; non-linear construction simulation
537
0
0