砌体与钢筋混凝土框架平面混合结构抗震性能评估及加固方法研究

引用文献:

郑士举. 砌体与钢筋混凝土框架平面混合结构抗震性能评估及加固方法研究[J]. 建筑结构,2022,48(08):60-65.

ZHENG Shiju. Research on seismic performance evaluation and strengthening method of planar mixed structure by masonry and reinforced concrete frame[J]. Building Structure,2022,48(08):60-65.

作者:郑士举
单位:上海市建筑科学研究院有限公司 上海市工程结构安全重点实验室
摘要:我国规范中对既有建筑中存在的砌体与钢筋混凝土框架平面混合结构的抗震验算及加固方法未详细规定。对此类结构在水平地震作用下的受力机理以及水平剪力分配计算方法进行了分析,此类结构在水平地震作用下水平剪力主要由砖墙承担,砖墙与框架不能同时达到承载能力极限状态,不能有效协同工作,总体抗震性能较差。在抗震验算时,对于砖墙应考虑其承担全部水平地震剪力,而对于框架应按砖墙严重开裂后的有效刚度进行剪力分配。结果表明,通过设置一定数量的钢筋混凝土剪力墙将其加固为砖墙-混凝土墙组合结构具有良好的效果,砌体承担的水平剪力明显下降,结构具有多道抗震防线,抗倒塌能力得以大幅提高,但应控制钢筋混凝土墙高宽比在合理的范围内,并设置可靠的基础以保证由墙肢受弯承载力起控制作用。
关键词:砌体,钢筋混凝土框架,混合结构,受力机理,水平剪力分配,抗震性能评估,抗震加固
作者简介:郑士举,硕士,高级工程师,一级注册结构工程师,主要从事既有建筑鉴定与加固研究,Email:zsj85408048@163.com。
基金:国家重点研发计划项目(2017YFC0806100);上海市科学技术委员会项目(19DZ1202400)。
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 建筑抗震鉴定标准:GB 50023—2009[S].北京:中国建筑工业出版社,2009.
[2] 叶列平,曲哲,陆新征,等.建筑结构的抗倒塌能力—汶川地震建筑震害的教训[J].建筑结构学报,2008,29(4):42-50.
[3] 赵干荣,甘立刚,曹桓铭.芦山地震中典型框架-砌体墙平面混合结构教学楼震害分析[J].四川建筑科学研究,2016,42(3):63-66.
[4] 孙伟民,郭樟根,丁帅,等.中小学建筑RC框架-砌体混合结构抗震性能[J].南京工业大学学报(自然科学版),2009,31(1):60-65.
[5] 郑士举,郑乔文.砌体与钢筋混凝土框架混合结构抗震性能试验研究[J].四川建筑科学研究,2018,44(2):27-33.
[6] 郑士举,郑乔文.砌体与钢筋混凝土框架混合结构抗震加固试验研究[J].四川建筑科学研究,2020,46(4):25-33.
[7] 郑士举,刘若愚,王煜成.砌体与钢筋混凝土框架混合结构抗震加固弹塑性地震反应分析[C]//第十四届全国建筑物鉴定与加固改造学术会议论文集.青岛,2018:278-282.
[8] 孙建,邵云,黎少华.某RC框架-砌体墙平面混合结构抗震鉴定与加固设计[J].建筑科学,2012,28(5):100-103.
[9] 蒋济同,杜德润,杨松,等.框架-砌体混合结构的准混凝土、准砌体抗震加固方法研究[J].建筑技术,2015,46(S2):43-47.
[10] 钟锡根,杨翠如,刘大海.内框架房屋抗震的空间分析[J].建筑结构学报,1984(4):45-57.
[11] 建筑抗震设计规范:GB 50011—2010 [S].北京:中国建筑工业出版社,2010.
[12] 高层建筑混凝土结构设计技术规程:JGJ 3—2010 [S].北京:中国建筑工业出版社,2011.
[13] 蒋利学,张富文,李向民,等.用增设钢筋混凝土墙提高砌体结构抗震性能的试验研究[J].土木工程学报,2017,50(10):33-44.
[14] 高小旺.砌体墙与钢筋混凝土墙组合结构房屋的抗震性能[J].建筑结构,2003,33(10):71-73.
[15] 高小旺,高炜,刘佳,等.多层砌体教学楼抗震加固为砌体墙与钢筋混凝土墙组合结构的探讨[J].建筑结构,2010,40(5):8-10.
Research on seismic performance evaluation and strengthening method of planar mixed structure by masonry and reinforced concrete frame
ZHENG Shiju
(Shanghai Research Institute of Building Sciences Co., Ltd. Shanghai Key Laboratory of Engineering Structure Safety)
Abstract: The seismic checking and reinforcement methods of planar mixed structure by masonry and reinforced concrete frame in existing buildings are not specified in China's code. The force mechanism and the calculation method of horizontal shear force distribution of this kind of structure under horizontal earthquake action were analyzed. The horizontal shear force of this kind of structure under horizontal earthquake action is mainly borne by the brick wall. The brick wall and the frame cannot reach the ultimate state of bearing capacity at the same time, and cannot work together effectively, and the overall seismic performance is poor. In the seismic checking, the brick wall should be considered to bear all the horizontal seismic shear force, and the frame should be distributed according to the effective stiffness of the brick wall after serious cracking. The results show that by setting a certain number of reinforced concrete shear walls, the structure would be reinforced to be brick and concrete wall composite structure, which has good effect. The level of the masonry bear shear decreases obviously, the structure has a multichannel seismic lines, and collapse resistance can be greatly increased. But the height-width ratio of reinforced concrete wall should be controlled in a reasonable range, and a reliable foundation is set to ensure that the bending capacity of the wall limb plays a controlling role.
Keywords: masonry; reinforced concrete frame; mixed structure; force mechanism; horizontal shear distribution; seismic performance evaluation; seismic strengthening
485 0 0
文字:     A-     A+     默认 取消