浆锚搭接连接装配式联肢剪力墙抗震性能试验研究

作者:汤磊 ,郭正兴, 周恩泉
单位:东南大学土木工程学院
摘要:浆锚搭接连接装配式联肢剪力墙的上、下层预制剪力墙通过钢筋浆锚搭接连接,预制剪力墙与叠合连梁通过剪力墙预留凹口现浇混凝土及叠合层混凝土连接成整体。为掌握装配式联肢剪力墙的真实抗震性能,制作了1个装配式试件和1个现浇对比试件,并对其进行了低周反复水平荷载试验。通过对比试件的破坏形态、滞回曲线与骨架曲线、强度与刚度、位移延性及耗能能力等,对装配式试件的抗震性能进行评价。试验及分析结果表明,装配式试件发生与现浇试件相同的墙肢弯剪破坏与连梁剪切破坏,新、老混凝土界面未影响裂缝开展及试件整体性;与现浇试件相比,装配式试件的强度与刚度提高,位移延性有所降低,耗能能力提高;浆锚搭接连接装配式联肢剪力墙抗震性能总体上可达到“等同现浇”,可应用于实际工程。
关键词:预制混凝土;联肢剪力墙;浆锚搭接连接;抗震性能;连梁
作者简介:汤磊,博士,副研究员,主要从事装配式混凝土结构研究,Email:seutanglei@163.com。
基金:国家重点研发计划项目(2016YFC0701703)。 -页码-:112-117
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] KURAMA Y C,SHEN Q.Posttensioned hybrid coupled walls under lateral loads[J].Journal of Structural Engineering,2004,130(2):297-309.
[2] WELDON B D,KURAMA Y C.Experimental evaluation of posttensioned precast concrete coupling beams[J].Journal of Structural Engineering,2010,136(9):1066-1077.
[3] 蔡小宁,孟少平,陈佳佳,等.预应力预制混合装配短肢墙受力性能分析[J].工业建筑,2011,41(1):73-76,92.
[4] ZHANG Z Y,DING R,FAN J S,et al.Seismic performance and shear strength of coupling beams using engineered cementitious composites with different reinforcement layouts[J].Engineering Structures,2020,219:110895.
[5] HAN S W,KANG J W,JEE H W,et al.Cyclic behavior of HPFRCC coupling beams with bundled diagonal bars[J].International Journal of Concrete Structures and Materials,2018,12:42.
[6] YANG J,LIANG S T,ZHU X J,et al.Seismic behavior of precast concrete coupled shear walls with engineered cementitious composite (ECC)in the critical cast-in-place regions[J].Science China Technological Sciences,2017,60(8):1244-1254.
[7] LEQUESNE R D,PARRA-MONTESINOS G J,WIGHT J K.Seismic behavior and detailing of high-performance fiber-reinforced concrete coupling beams and coupled wall systems[J].Journal of Structural Engineering,2013,139(8):1362-1370.
[8] PARK W S,YUN H D.Seismic performance of pseudo strain-hardening cementitious composite coupling beams with different reinforcement details[J].Composites Part B:Engineering,2011,42(6):1427-1445.
[9] LIM W Y,KANG T H K,HONG S G.Effect of reinforcement details on seismic behavior of precast concrete wall-steel coupling beam systems[J].ACI Structural Journal,2018,115(6):1751-1763.
[10] LI X,LV H L,ZHANG G C,et al.Seismic behavior of replaceable steel truss coupling beams with buckling restrained webs[J].Journal of Constructional Steel Research,2015,104:167-176.
[11] 李书蓉,蒋欢军.带可更换连梁的新型联肢剪力墙的设计与分析[J].同济大学学报(自然科学版),2018,46(7):868-876.
[12] WANG Z,PAN W.A hybrid coupled wall system with replaceable steel coupling beams for high-rise modular buildings[J].Journal of Building Engineering,2020,31:101355.
[13] 田瑞鑫.摩擦型可恢复功能联肢剪力墙抗震性能及设计方法研究[D].大连:大连理工大学,2021.
[14] 钱辉,徐建,张勋,等.带自复位耗能连梁的剪力墙结构的抗震性能[J].土木与环境工程学报(中英文),2021,43(3):9-15.
[15] 钱稼茹,彭媛媛,张景明,等.竖向钢筋套筒浆锚连接的预制剪力墙抗震性能试验[J].建筑结构,2011,41(2):1-6.
[16] 钱稼茹,韩文龙,赵作周,等.钢筋套筒灌浆连接装配式剪力墙结构三层足尺模型子结构拟动力试验[J].建筑结构学报,2017,38(3):26-38.
[17] 钱稼茹,彭媛媛,秦珩,等.竖向钢筋留洞浆锚间接搭接的预制剪力墙抗震性能试验[J].建筑结构,2011,41(2):7-11.
[18] 朱张峰,郭正兴.考虑竖向与水平接缝的工字形装配式混凝土剪力墙抗震性能试验研究[J].工程力学,2019,36(3):139-148.
[19] PARK R.Evaluation of ductility of structures and structural assemblages from laboratory testing[J].Bulletin of the New Zealand Society for Earthquake Engineering,1989,22(3):155-166.
Experimental study on seismic performance of assembled coupled shear wall with lap joints
TANG Lei, GUO Zhengxing, ZHOU Enquan
(School of Civil Engineering,Southeast University)
Abstract: The upper and lower prefabricated shear walls of assembled coupled shear wall with lap joints are connected by steel lap joints. The prefabricated shear wall and the superimposed coupling beam are connected into a whole through cast-in-place concrete of the reserved notch of the shear wall and the superimposed layer concrete. To grasp the real seismic performance of the assembled coupled shear wall, a prefabricated specimen and a cast-in-place comparative specimen were made, and low-cycle repeated horizontal load tests were carried out on them. The seismic performance of the prefabricated specimens was evaluated by comparing the failure modes, hysteresis curves and skeleton curves, strength and stiffness, displacement ductility and energy dissipation capacity of the specimens. The test and analysis results show that the prefabricated specimens have the same bending shear failure of wall piers and coupling beam shear failures as the cast-in-place specimens, and the interface between the new and old concrete does not affect the development of cracks and the integrity of the specimens; compared with the prefabricated specimens, the strength and stiffness of the prefabricated specimens are improved, the displacement ductility is decreased, and the energy dissipation capacity is improved; the seismic performance of the assembled coupled shear wall with lap joints can reach the seismic performance equivalent to cast-in-place, which can be applied to in actual engineering.
Keywords: precast concrete; coupled shear wall; lap joint; seismic performance; coupling beam
440 0 0
文字:     A-     A+     默认 取消