浅谈采用并联电容器装置进行无功功率补偿的实际输出容量

作者:李喆
单位:中国建筑设计研究院有限公司
摘要:为了在电力供电系统中提高电网的功率因数、降低供电变压器及输送线路的损耗、提高供电效率、改善供电环境的技术,针对无功功率的产生与补偿,本文归纳总结并联电容器装置进行无功功率补偿的实际输出容量,为工业与民用供配电设计人员日后正确选择电容器有着重要意义。
关键词:供电系统无功功率电容器有功功率
作者简介:李喆,智能工程中心副主任,高级工程师。;
尊敬的用户,本篇文章需要1元,点击支付交费后阅读
参考文献[1] GB 50052-2009 供配电系统设计规范[S].北京:中国计划出版社.2010.

[2] GB 50227-2017 并联电容器装置设计规范[S].北京:中国计划出版社.2017.

[3] DL/T 1773-2017电力系统电压和无功电力技术导则[S].北京:中国电力出版社.2019.

[3] 国家电网公司.国家电网公司电力系统电压质量和无功电力管理规定,2009.

[4] 中国航空规划设计研究总院有限公司组编.工业与民用供配电设计手册(第四版)[M].北京:中国电力出版社.2016.
Discussion on the Actual Output Capacity of Reactive Power Compensation with Capacitor Device
Li Zhe
(China Architecture Design & Research Group Co., Ltd.)
Abstract: In order to improve the power factor of power grid, reduce the loss of power supply transformer and transmission line, improve power supply efficiency and improve the power supply environment in the power supply system, the actual output capacity of reactive power compensation of shunt capacitor device is summarized for industrial and civil power supply and distribution designers in the future It is of great significance.
Keywords: system of power supply; reactive power; capacitor; active power;
1381 0 0
文字:     A-     A+     默认 取消