斜柱网格体系内部混凝土浇灌实体模型及检测试验研究

引用文献:

王震 杨学林 赵阳 吴小平 瞿浩川. 斜柱网格体系内部混凝土浇灌实体模型及检测试验研究[J]. 建筑结构,2023,48(06):124-130.

WANG Zhen YANG Xuelin ZHAO Yang WU Xiaoping QU Haochuan. Experimental study on solid model and detection of the internal pouring concrete for the inclined column grid system[J]. Building Structure,2023,48(06):124-130.

作者:王震 杨学林 赵阳 吴小平 瞿浩川
单位:浙大城市学院土木工程系 浙江省建筑设计研究院 浙江大学空间结构研究中心
摘要:钢管混凝土斜柱体系内部浇灌混凝土的密实度质量是保证整体结构承载性能的重要因素。以X形平面斜柱节点、K形空间斜柱节点为例,建立钢管混凝土斜柱的足尺试验模型,通过超声CT技术检测其内部浇灌混凝土的密实度,以获得合理有效的浇灌工艺并应用于工程;进而针对斜柱网格体系的混凝土密实度检测布置进行了研究。结果表明:试验模型钢板较厚时,采用CT成像检测可获得精确结果;试验模型浇灌工艺满足密实度要求时,实际施工应采用相同工艺以保证质量;对于混凝土密实度不足之处,可采用钻孔压浆法补强,而后补焊封回;钢管混凝土斜柱内部混凝土密实度检测布置包括斜柱构件检测数量、横截面检测位置两方面。
关键词:钢管混凝土斜柱;足尺模型试验;CT成像检测;混凝土密实度;浇灌工艺;检测布置方案;
作者简介:王震,博士,副教授,主要从事超高层、大跨空间和复杂钢结构的设计和科研工作,Email:wzjggc@163.com。
基金:浙江省基础公益研究计划项目(LGG22E080005);浙江省教育厅科研项目(Y202146072);浙江省水利厅重点科技项目(RB1909)。
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] MOON K S,CONNOR J J,FERNANDEZ J E.Diagrid structural systems for tall buildings:characteristics and methodology for preliminary design[J].The Structural Design of Tall and Special Buildings,2007,16(2):205-230.
[2] 史庆轩,任浩,戎翀.高层斜交网格筒结构体系剪力滞后效应研究[J].建筑结构,2016,46(4):1-7.
[3] 赵帆,陈长嘉,刘博.超高层斜交网格筒体结构减震设计研究[J].建筑结构,2019,49(S2):437-444.
[4] 于清,阎善章.钢管混凝土中核心混凝土浇筑质量的过程控制方法探讨[J].工业建筑,2008,38(9):104-106.
[5] 金瑞灵,南峰,伍勇华,等.超声波测试矩形钢管混凝土密实度的试验研究[J].混凝土与水泥制品,2017(10):73-76.
[6] 刘晓英,刘敏,刘晓林,等.超高复杂塔台斜交网格筒自密实混凝土浇筑高度研究[J].施工技术(中英文),2022,51(15):58-62.
[7] 郭锋,杨勇,孙锐,等.声波CT技术在混凝土结构中的运用[J].工程地球物理学报,2013,10(2):256-258.
[8] 建筑结构检测技术标准:GB/T 50344—2004[S].北京:中国建筑工业出版社,2004.
[9] 张吉,师学明,陈晓玲,等.超声波CT技术在混凝土无损检测中的应用现状及发展趋势[J].工程地球物理学报,2008,5(5):596-601.
[10] 徐邦学.混凝土结构无损检测与故障处理及修复加固技术手册[M].北京:当代中国音像出版社,2004.
[11] 杭州华新检测技术股份有限公司.宁波国华金融大厦钢管混凝土实体模型混凝土质量BCT检测技术咨询报告:HXT-BCT-2017001[R].杭州,2017.
[12] 路士义.声波层析成像在桥梁混凝土质量检测中的试验研究[D].沈阳:沈阳大学,2018.
Experimental study on solid model and detection of the internal pouring concrete for the inclined column grid system
WANG Zhen YANG Xuelin ZHAO Yang WU Xiaoping QU Haochuan
(Department of Civil Engineering, Zhejiang University City College Zhejiang Province Institute of Architectural Design and Research Space Structures Research Center,Zhejiang University)
Abstract: The compactness quality of the internal pouring concrete for the concrete-filled steel tube inclined column system is an important factor to ensure the bearing capacity of the whole structure. Taking X-type plane inclined column joint and K-type space inclined column joint as examples, a full-scale test model for the concrete-filled steel tube inclined column was established. Ultrasonic CT technology was used to detect the compactness of the internal pouring concrete, so as to obtain a reasonable and effective pouring technology and apply it to engineering. Furthermore, the detection arrangement of the concrete compactness for the inclined column grid system was studied. The results show that: when the steel plate of the test model is relatively thick, the CT imaging detection can be used to obtain accurate results; when the pouring technique of the test model meets the requirement of compactness, the same technique should be adopted in the actual construction to ensure the quality; for the position of insuffient concrete compactness, the drilling grouting method can be used to strength, and then repair welding sealing; the detection arrangement of the internal pouring concrete compactness for concrete-filled steel tube inclined column includes two aspects: the detection quantity of the inclined column components and the detection position of the cross sections.
Keywords: concrete-filled steel tube inclined column; full-scale model test; CT imaging detection; concrete compactness; pouring technique; detection arragement scheme
535 0 0
文字:     A-     A+     默认 取消