大跨无粘结预应力高强度纤维混凝土梁受弯性能试验研究及数值分析

引用文献:

郭庆勇 贾朝辉 徐海峰. 大跨无粘结预应力高强度纤维混凝土梁受弯性能试验研究及数值分析[J]. 建筑结构,2022,48(06):69-75.

GUO Qingyong JIA Chaohui XU Haifeng. Experimental study and numerical analysis of flexural performance of large-span unbonded prestressed HSFRC beam[J]. Building Structure,2022,48(06):69-75.

作者:郭庆勇 贾朝辉 徐海峰
单位:哈尔滨工程大学航天与建筑工程学院
摘要:以高强度纤维混凝土(HSFRC)代替传统的混凝土有望大大提高结构自身的跨度,提高梁的延性及耗能能力。新型材料HSFRC的本构关系是目前的研究热点,但针对大跨足尺的无粘结预应力HSFRC梁受弯试验研究仍不够充分。针对上述问题,以梁长为21m的工形截面大跨足尺无粘结预应力HSFRC梁受弯试验数据为基础,提出了当钢纤维体积掺量为2%时适用于HSFRC梁的材料受拉本构模型,并将其应用于有限元模拟。有限元结果与试验结果比较表明:本文提出的HSFRC受拉本构模型可以反映出HSFRC材料对梁受弯性能的改善作用,且形式简单;使用局部坐标系的Coupling约束可以合理地反映曲线型无粘结预应力筋与混凝土之间的相互作用;本模型及其建模方法适用于大跨无粘结预应力HSFRC梁受弯性能的分析,在一定程度上可以代替试验,能够较准确地反映试验梁受弯变形的规律。
关键词:高强度纤维混凝土,本构模型,无粘结预应力,应力增量,受弯试验,有限元模拟
作者简介:郭庆勇,博士,讲师,硕士生导师,主要从事新型复合材料与超高性能混凝土材料及其结构性能等方面的研究,Email:guoqingyong@hrbeu.edu.cn。
基金:
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 马恺泽,刘亮,刘超.高强混合钢纤维混凝土的力学性能[J].建筑材料学报,2017,20(2):261-265.
[2] MANJU R.Experimental and analytical investigation on flexural behaviour of high strength fibre reinforced concrete (HSFRC)beams[J].Revista Romana De Materiale-Romanian Journal of Materials,2019,49(3):416-423.
[3] BANJARA N K,K RAMANJANEYULU.Experimental and numerical study on behaviour of HSFRC overlay strip strengthened flexural deficient RC beams[J].Engineering Structures,2019,198(2):109561.1-109561.19.
[4] IN HWAN YANG,HANGBIN JOH,YOUNG CHUL KIM.A comparative experimental study on the flexural behavior of high-strength fiber-reinforced concrete and high-strength concrete beams[J].Advances in Materials Science and Engineering,2018(7):1-13.
[5] 张森,熊学玉,包联进.有粘结与无粘结混合配置预应力筋混凝土梁设计[J].建筑结构,2018,48(8):21-23.
[6] 张耀庭,刘牧明,李双林,等.无粘结预应力混凝土梁的拟静力试验及有限元分析[J].土木工程与管理学报,2017,34(4):1-6,13.
[7] HAN S M,Q Y GUO.Analysis on the moment-curvature relationship for prestressed UHPFRC beams without stirrup[J].Advanced Materials Research,2011,1279(255-260):236-240.
[8] SINGH H.Flexural modeling of steel fiber-reinforced concrete members:analytical investigations[J].Practice Periodical on Structural Design and Construction,2015,20(4):04014046.1-10.
[9] National addition to Eurocode 2—design of concrete structures:specific rules for ultra-high performance fibre-reinforced concrete(UHPFRC):NFP18-710[S].Rance:FGC Publication,2016.
[10] 潘立.混凝土受弯构件中无粘结预应力筋极限应力的解析算法[J].建筑结构,2019,49(3):61-65.
[11] 赵文忠,陈向伟,戎贤.配置高强钢筋的无粘结部分预应力梁受弯试验研究及有限元模拟分析[J].河北工业大学学报,2019,48(1):79-84.
[12] 吴山,陈建伟,霍永刚,等.基于OpenSEES的无粘结预应力混凝土梁抗弯性能分析[J].华北理工大学学报(自然科学版),2018,40(1):35-43.
Experimental study and numerical analysis of flexural performance of large-span unbonded prestressed HSFRC beam
GUO Qingyong JIA Chaohui XU Haifeng
(College of Aerospace and Architectural Engineering, Harbin Engineering University)
Abstract: High strength fiber reinforced concrete(HSFRC), which is used to replace the traditional concrete, is expected to greatly increase the structure's own span and increase the ductility and energy dissipation capacity of the beam. The constitutive relationship of the new material HSFRC is the current research hotspot, but the bending test data of the large-span full-scale unbonded prestressed HSFRC beam is still insufficient. In view of the above problems, based on the bending test data of the large-span full-scale unbonded prestressed HSFRC beam with a beam length of 21 m in an I-section. The tensile constitutive model was suitable for HSFRC beams when the volume content of steel fiber is 2%, which is applied to the finite element simulation. The comparison between the finite element results and the test results shows that the HSFRC tensile constitutive model proposed in this thesis can demonstrate HSFRC materials improvement effect on the bending performance of beams, and the form is simple. Coupling constraint, where local coordinate system is used, can reasonably show the interaction between uncured prestressed tendons and concrete; this model and its modeling method are suitable for the analysis of the bending performance of large-span unbonded prestressed HSFRC beams. It can replace the test to a certain extent, and can more accurately reveal the law of the bending deformation of the test beam.
Keywords: high strength fiber reinforced concrete; constitutive model; unbonded prestressed; stress increment; bending test; finite element simulation
543 0 0
文字:     A-     A+     默认 取消