重庆某山地掉层建筑边坡支挡及结构设计

引用文献:

于恒兵 徐诗童 糜斌 邬险峰 田宗宇. 重庆某山地掉层建筑边坡支挡及结构设计[J]. 建筑结构,2022,48(14):50-58,97.

YU Hengbing XU Shitong MI Bin WU Xianfeng TIAN Zongyu. Slope support and structure design of a building supported by foundations with different elevations on the slope in Chongqing[J]. Building Structure,2022,48(14):50-58,97.

作者:于恒兵 徐诗童 糜斌 邬险峰 田宗宇
单位:中煤科工重庆设计研究院集团)有限公司
摘要:掉层建筑因不等高基础嵌固的存在,结构刚度在水平及竖向分布不均匀。同时,受到边坡岩土性质、边坡高度、边坡支挡形式和结构接地类型等因素的影响,掉层结构的受力与变形特点、动力响应特征等与常规建筑结构存在较大差异。以某山地掉层剪力墙结构为例,从设计理论依据、荷载取值、结构布置、抗震验算、抗震构造、边坡支挡、基础与主体设计等方面对掉层结构的设计方法进行了简要介绍。通过对掉层结构不规则性特点和震害特征分析,对其设计要点进行了总结,可为类似项目提供一定的借鉴。
关键词:山地建筑;掉层结构;抗震性能;锚杆支护;结构设计
作者简介:于恒兵,学士,高级工程师,一级注册建造师,主要从事建筑结构设计工作,Email:370420450@qq.com。糜斌,学士,教授级高级工程师,一级注册结构工程师,主要从事建筑结构设计工作,Email:519073844@qq.com。
基金:
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 重庆市住宅建筑结构设计规程:DBJ50/T-243—2016[S].重庆:重庆市城乡建设委员会,2017.
[2] 李英民,刘立平,韩军.山地建筑结构基本概念与性能[M].北京:科学出版社,2016.
[3] 山地建筑结构设计标准:JGJ/T 472—2020[S].北京:中国建筑工业出版社,2020.
[4] 建筑抗震设计规范:GB 50011—2010[S].北京:中国建筑工业出版社,2010.
[5] 高层建筑混凝土结构技术规程:JGJ 3—2010[S].北京:中国建筑工业出版社,2011.
[6] 高层建筑混凝土结构技术规程:DBJ 15-92—2013[S].广州:广东省住房和城乡建设厅,2013.
[7] 王丽萍.山地建筑结构设计地震动输入与侧向刚度控制方法[D].重庆:重庆大学,2010.
[8] 赵宏,林海,冯文琪,等.贵阳山地条件下特殊高层建筑结构设计[J].建筑结构,2014,44(24):37-42.
[9] 建筑结构荷载规范:GB 50009—2012[S].北京:中国建筑工业出版社,2012.
[10] 李英民,刘立平.汶川地震建筑震害与思考[M].重庆:重庆大学出版社,2008.
[11] 王丽萍,李英民,郑妮娜,等.5·12汶川地震典型山地建筑结构房屋震害调查[J].西安建筑科技大学学报(自然科学版),2009,41(6):822-826.
[12] 李英民,姬淑艳,唐洋洋,等.山地建筑结构特殊问题与研究进展[J].建筑结构,2019,49(19):76-82.
[13] 建筑地基基础设计规范:DBJ50-047—2016[S].重庆:重庆市城乡建设委员会,2016.
[14] 崔英豪.山地框架剪力墙结构整体抗倾覆性能分析[D].重庆:重庆大学,2017.
[15] 建筑边坡工程技术规范:GB 50330—2013[S].北京:中国建筑工业出版社,2013.
[16] 关于进一步加强全市高切坡、深基坑和高填方项目勘察设计管理的意见:渝建发[2010]166号[A].重庆:重庆市城乡建设委员会,2010.
[17] 建筑桩基础设计与施工验收规范:DBJ50-200—2014[S].重庆:重庆市城乡建设委员会,2014.
[18] 刘立平,李英民,罗建,等.边坡变形作用下坡地建筑结构的力学行为探讨[J].土木工程学报,2013,46(S2):63-67.
[19] 王方,杨智.斜坡高填土地基上的建筑结构设计探讨[J].建筑结构,2001,31(10):36-38.
[20] 张小良,齐建林,马帧.某山地高层住宅基础设计与研究[J].建筑结构,2020,50(10):122-128,121.
[21] 赵耀.掉层结构动力特性及整体抗倾覆分析[D].重庆:重庆大学,2011.
Slope support and structure design of a building supported by foundations with different elevations on the slope in Chongqing
YU Hengbing XU Shitong MI Bin WU Xianfeng TIAN Zongyu
(CCTEG Chongqing Engineering (GROUP) Co., Ltd.)
Abstract: Because of the building foundation with different elevations, the structural stiffness is unevenly distributed horizontally and vertically. At the same time, because of the influence of rock and soil properties, slope height, slope supporting form and structure earthing type, there are great differences between the building supported by foundations with different elevations and the conventional building in the characteristics of stress and deformation, dynamic response and so on. Take the shear wall structure on the slope as an example, the design method of structure supported by foundations with different elevations was briefly introduced from the aspects of design theory, load value, structure arrangement, aseismic checking calculation, aseismic structure, slope support, foundation and main body design. Based on the analysis of the irregular characteristics and seismic damage characteristics of the structure supported by foundations with different elevations, the key points of its design were summarized, which can be used for reference for similar projects.
Keywords: building on the slope; structure supported by foundation with different elevation; seismic performance; retaining wall with anchor; structure design
466 0 0
文字:     A-     A+     默认 取消