大面积堆载作用下港口干煤棚结构设计与研究

作者:田磊 蔺雪峰 黄彦军
单位:北京市市政工程设计研究总院有限公司 中交水运规划设计院有限公司 北京城建集团有限责任公司
摘要:为研究软弱场地土条件下柱面网壳支座荷载和大面积堆载作用下干煤棚桩基受力与变形特性,通过某工程实例,进行了软弱场地土条件下干煤棚上部结构的内力分析,并对网壳支座荷载和大面积堆载作用下桩身变形进行了理论计算和有限元分析,对结果进行了分析比较。结果表明,按角点法和等效土层厚度法计算的桩顶水平位移接近;软弱土地质情况下规范理论设计方法仅能较好地反映荷载作用下距离桩顶4/α范围内桩身位移的变化,桩承台有限元分析可反映大面积堆载作用下整个桩身变形和受力特性;根据计算得到的桩顶位移可近似换算出上部柱面网壳支座处的水平位移,可以此作为上部网壳支座荷载的设计依据。
关键词:干煤棚;软弱土;大面积堆载;桩身变形;桩身受力;
作者简介:田磊,硕士,高级工程师,从事建筑结构设计与理论研究,Email:tianlei@bmedi.cn。
基金: -页码-:79-86
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 罗尧治,胡宁,沈雁彬.108m跨度干煤棚三心圆柱面网壳研究与设计[C]//第二届现代结构工程学术研讨会论文集.北京:工业建筑杂志社,2002.
[2] 钱若军,沈祖炎,费军,等.嘉兴电厂干煤棚双层柱面网架分析研究[J].空间结构,1994(1):47-54.
[3] 高博青.电厂干煤棚的选型和工程实践[J].工业建筑,1997,27(4):18-20,33.
[4] 杨勇,柯维林,刘春萍,等.干煤棚设计关键技术研究[C]//中国土木工程学会.自动化集装箱码头应用技术交流会论文集.厦门,2015.
[5] 刘金荣,金鑫.大跨度干煤棚网壳结构设计探讨[C]//中国大型建筑钢结构工程设计与施工.北京:中国建筑工业出版社,2007.
[6] 煤矿矿井建筑结构设计规范:GB 50592—2010[S].北京:中国计划出版社,2011.
[7] 高鹏.大气腐蚀干煤棚焊接空心球对结构承载力影响研究[J].建筑结构,2019,49(4):98-102.
[8] 胡洋.大跨度干煤棚预应力钢结构施工模拟仿真计算与施工技术研究[J].施工技术,2021,50(8):128-131.
[9] 建筑结构荷载规范:GB 50009—2012[S].北京:中国建筑工业出版社,2012.
[10] 福建建筑结构风压规程:DBJ/T 13-141-2011[S].福州:福建省住房和城乡建设厅,2011.
[11] 建筑桩基技术规范:JGJ 94—2008[S].北京:中国建筑工业出版社,2008.
[12] 港口工程桩基规范:JTS 167-4-2012 [S].北京:人民交通出版社,2012.
[13] 郭莹,郭承侃,路尚谟.土力学[M].2版.大连:大连理工大学出版社,2003.
[14] 袁名礼.大面积地面堆载作用下的桩基础设计计算[J].工业建筑,1993,23(3):42-45,51.
Structural design and research on port dry-coal shed under large area surcharge load
TIAN Lei LIN Xuefeng HUANG Yanjun
(Beijing General Municipal Engineering Design & Research Institute Co., Ltd. CCCC Water Transportation Consultants Co., Ltd. Beijing Urban Construction Group Co., Ltd.)
Abstract: In order to study the stress and deformation characteristics of pile foundation of dry-coal shed under the support load of cylindrical latticed shell and large area surcharge load for the geological conditions of soft weak soil, the internal force of upper structure was analyzed basing on the actual engineering example, and the theoretical calculation and finite element analysis of pile deformation under the support load of cylindrical latticed shell and large area surcharge load were carried out and the results were analyzed and compared. The results show that the horizontal displacement of pile top calculated by corner method are consistent with those by equivalent soil layer thickness method. In the case of geological conditions of soft weak soil, The standard theoretical design method can only reflect the change of pile body displacement within 4/α range from the pile top under the action of load and the finite element analysis can reflect the deformation and mechanical characteristics of the whole pile body under large area surcharge load. According to the calculated displacement of the pile top, the horizontal displacement at the support of the upper structure can be approximately converted, which can be used as the design basis for the support load of the upper cylindrical latticed shell.
Keywords: dry-coal shed; soft weak soil; large area surcharge load; pile deformation; pile force
989 0 0
文字:     A-     A+     默认 取消