西安咸阳国际机场东航站楼隔震设计

引用文献：

李靖曹莉扈鹏辛力王勉徐良齐朱聪杜文. 西安咸阳国际机场东航站楼隔震设计[J]. 建筑结构，2022，48（11）：15-21.

LI Jing CAO Li HU Peng XIN Li WANG Mian XU Liangqi ZHU Cong DU Wen. Seismic isolation design on east terminal building of Xi'an Xianyang International Airport[J]. Building Structure，2022,48（11）：15-21.

作者：李靖曹莉扈鹏辛力王勉徐良齐朱聪杜文

单位：中国建筑西北设计研究院有限公司

摘要：西安咸阳国际机场东航站楼主体结构为钢筋混凝土框架结构，屋盖及其支撑体系为钢结构。中央主楼核心区长486m,宽252m,作为人流密集的国家级交通枢纽工程，建筑功能复杂，抗震设防标准高，设计采用了层间隔震技术。隔震层由铅芯橡胶隔震支座、普通橡胶隔震支座、弹性滑板支座和黏滞阻尼器组合而成。隔震相关计算分析及验算结果表明，设防地震作用下隔震后上部结构楼层剪力及楼层加速度降低至非隔震时的38%以下，隔震层上部结构可按降低设防烈度1度进行设计。罕遇地震下隔震层下柱墩变形及承载力验算结果表明，通过设置型钢拉梁层能够使其满足罕遇地震下的变形及承载力要求。隔震结构的温度效应计算结果表明，隔震后结构温度应力效应显著降低，通过合理设置结构后浇带，隔震层在施工阶段及正常使用阶段的温度变形均能满足预期的性能要求。最后采用时程法研究了隔震层在遭遇罕遇地震后的自复位能力，结果显示，隔震层震后残余变形较小，自复位能力良好。

关键词：西安咸阳国际机场；航站楼；隔震设计；隔震支座；弹性滑板支座；黏滞阻尼器；温度效应

作者简介：李靖，硕士，高级工程师，一级注册结构工程师，主要从事工程抗震研究，Email:497825805@qq.com。

基金：中国建筑西北设计研究院有限公司科技研发课题(201817)。

尊敬的用户，本篇文章需要2元，点击支付交费后阅读

限时优惠福利：领取VIP会员
全年期刊、会议视频
全部免费！培训视频打折！

参考文献[1] 曹莉，扈鹏，王勉，等.西安咸阳国际机场东航站楼结构设计[J].建筑结构，2022,52(11):1-7,21.
[2] 扈鹏，曹莉，李贞，等.西安咸阳国际机场东航站楼钢结构设计[J].建筑结构，2022,52(11):8-14,63.
[3] 周福霖，张颖，谭平.层间隔震体系的理论研究[J].土木工程学报，2009,42(8):1-8.
[4] 建筑抗震设计规范：GB 50011—2010[S].2016年版.北京：中国建筑工业出版社，2016.
[5] 束伟农，朱忠义，张琳，等.北京新机场航站楼隔震设计与探讨[J].建筑结构，2017,47(18):6-9.
[6] 刘鑫刚，张玲，马伯涛，等.成都博物馆基础隔震不规则结构扭转效应控制研究[J].建筑结构学报，2016,37(11):24-29.
[7] 橡胶支座第3部分：建筑隔震橡胶支座：GB 20688.3—2006[S].北京：中国建筑工业出版社，2006.
[8] 橡胶支座第5部分：建筑隔震弹性滑板支座：GB 20688.5—2014[S].北京：中国建筑工业出版社，2014.
[9] 建筑结构荷载规范：GB 50009—2012[S].北京：中国建筑工业出版社，2012.
[10] 吴宏磊，丁洁民，陈长嘉.西安丝路国际会议中心隔震技术应用研究[J].建筑结构学报，2020,41(2):14-19.

Seismic isolation design on east terminal building of Xi'an Xianyang International Airport

LI Jing CAO Li HU Peng XIN Li WANG Mian XU Liangqi ZHU Cong DU Wen

(China Northwest Architectural Design and Research Institute Co., Ltd.)

Abstract: The main structure of the east terminal building of Xi'an Xianyang International Airport is a reinforced concrete frame structure, and the roof and its supporting system are steel structures. The central core area of the main building is 486 m long and 252 m wide. As a national-level transportation hub project with dense crowds, the building functions are complex and the seismic fortification standard is high. Therefore, the design adopts floor-level seismic isolation technology. The vibration isolation layer is composed of lead rubber bearings, linear natural rubber bearings, elastic sliding bearings and viscous dampers. According to the relevant calculation analysis and checking calculation of seismic isolation, the floor shear force and floor acceleration of the superstructure after the seismic isolation were reduced to less than 38% of the non-isolation state, and the superstructure of the seismic isolation layer was designed according to the reduction of the fortification intensity by 1 degree. The deformation and bearing capacity of the column piers under the seismic isolation layer were checked for rare earthquakes, and the steel tie beam layers are set to make them meet the requirements of deformation and bearing capacity under rare earthquakes. The temperature effect of the isolation structure was studied, and the results show that the temperature stress effect of the structure is significantly reduced after isolation. By rationally setting the post-poured belts of the structure, the temperature deformation of the isolation layer during the construction stage and the normal use stage could meet the expected performance requirements. The time-history method was used to study the self-resetting ability of the isolation layer after encountering the rare earthquake. The results show that the residual deformation of the seismic isolation layer after the earthquake is small, and the self-resetting ability of the isolation layer is good.

Keywords: Xi'an Xianyang International Airport; terminal building; seismic isolation design; seismic isolator; elastic sliding bearing; viscous damper; temperature effect

393 0 0