大型光电显示器件工厂供配电系统设计中可靠性问题研讨

作者：牛光宏蒋鹏赞

单位：世源科技工程有限公司

摘要：通过实例分析项目建设中供配电系统调试及试运行阶段出现的问题及原因, 运用ETAP软件及现场调整处理问题的过程, 说明在工厂电气设计中, 新方法的引入、经验的积累、对象的深入了解等是提高系统可靠性的有效途径。

关键词：供配电系统可靠性 ETAP

尊敬的用户，本篇文章需要1元，点击支付交费后阅读

参考文献[1]任元会, 卞铠生等.工业与民用配电设计手册[M].北京:中国电力出版社, 2005.

[2]张保会, 尹项根.电力系统继电保护[M].北京:中国电力出版社, 2006.

[3]JGJ 16-2008民用建筑电气设计规范[S].北京:中国建筑工业出版社, 2008.

[4]GB/T 50062-2008电力装置的继电保护和自动装置设计规范[S].北京:中国计划出版社, 2008.

[5] 卓乐友, 董柏林.电力工程电气设计手册[M].北京:中国电力出版社, 2003.

[6]Operation Technology Inc. (OTI) .ETAP HELP.

Discussion on Reliability of Power Supply and Distribution System Design for Large Photoelectric Display Device Factory

Niu Guanghong Jiang Pengzan

Abstract: Through analyzing the causes of commissioning and trial stages in power supply system, using ETAP software and the process of on-site adjustment with deal with the problems, showing that the effective ways to improve the reliability of system of electric design in the factory, which including that a new method is introduced, and accumulating experience, and in-depth understanding of the objects.

Keywords: power supply and distribution system; reliability; ETAP;

734 10 10