叠合加固预制空心板界面粘结性能试验研究

引用文献:

舒田宇 徐福泉 谢剑. 叠合加固预制空心板界面粘结性能试验研究[J]. 建筑结构,2022,48(01):115-119.

SHU Tianyu XU Fuquan XIE Jian. Experimental study on the interface bonding performance of strengthening with concrete laminate layer with precast hollow slab[J]. Building Structure,2022,48(01):115-119.

作者:舒田宇 徐福泉 谢剑
单位:天津大学建筑工程学院 中国建筑科学研究院有限公司 北京市既有建筑改造工程技术中心天津分中心)
摘要:预制空心板空心率大,板顶混凝土厚度小,无法使用常规界面处理方法对其进行叠合加固。对9组混凝土推出试件(共27个试件)进行新旧混凝土界面剪切试验,研究几种界面处理措施下预制空心板叠合界面的粘结性能,同时研究尼龙锚栓应用于预制空心板叠合加固的可行性。结果表明,人工凿毛并辅以尼龙膨胀锚栓的界面处理措施可以满足叠合界面的规范要求,但是尼龙锚栓单独承受剪切作用时效果不佳。
关键词:预制空心板;叠合加固;粘结性能;界面处理;尼龙锚栓
作者简介:舒田宇,硕士研究生,主要从事混凝土结构加固方法研究,Email:shuty0312@tju.edu.cn。
基金:北京市科技计划课题(Z181100009218001)。
尊敬的用户,本篇文章需要2元,点击支付交费后阅读
参考文献[1] 胡克旭,刘宜良,汪洋.不同方法加固预应力混凝土空心板受力性能试验研究[J].结构工程师,2014,30(1):130-136.
[2] 屈文俊,马瑞嘉,崔巍.预制板现浇混凝土叠合层加固砌体教学楼的抗震性能分析[J].建筑科学与工程学报,2013,30(3):7-13.
[3] 张号军,卢亦焱.碳纤维布加固钢筋混凝土预制板的设计分析[J].建筑科学,2005,21(4):73-75.
[4] 卢亦焱,刘素丽,张号军.粘钢加固钢筋混凝土预制板的设计与应用[J].建筑结构,2004,34(9):13-14,17.
[5] 混凝土结构加固设计规范:GB 50367—2013[S].北京:中国建筑工业出版社,2014.
[6] 普通混凝土配合比设计规程:JGJ 55—2011[S].北京:中国建筑工业出版社,2011.
[7] 混凝土物理力学性能试验方法标准:GB/T 50081—2019 [S].北京:中国建筑工业出版社,2019.
[8] 管大庆,陈章洪,石韫珠.界面处理对新老混凝土粘结性能的影响[J].混凝土,1994(5):16-22,11.
[9] 全玥.复合砂浆加固混凝土构件界面粘结性能研究[D].长沙:湖南大学,2008.
[10] 混凝土结构设计规范:GB 50010—2010[S].北京:中国建筑工业出版社,2011.
Experimental study on the interface bonding performance of strengthening with concrete laminate layer with precast hollow slab
SHU Tianyu XU Fuquan XIE Jian
(School of Civil Engineering, Tianjin University China Academy of Building Research Beijing Engineering Research Center of Existing Building Renovation (Tianjin Branch))
Abstract: Conventional interface treatment cannot be used in strengthening precast hollow slabs with concrete laminate layer because of its characteristics of high void ratio and thin concrete layer on the slab top. The interface shear test of new and old concrete of 9 groups of push-out specimens(27 specimens) was carried out, and investigated the bonding performance of the composite interface of precast hollow slab based on interface treatment measures. At the same time, the feasibility of nylon anchor bolt applied to the composite reinforcement was discussed. The results show that the interface treatment measures of artificial chiseling and nylon expansion anchor bolt can meet the standard requirements of the composite interface, however the effect of nylon anchor bolt under shear alone is unsatisfactory.
Keywords: precast hollow slab; strengthening with concrete laminate layer; bonding performance; interface treatment; nylon anchor bolt
491 0 0
文字:     A-     A+     默认 取消